This doesn’t include the installation. Please be advise that you can attempt to install the antenna yourself only if you have experience. Otherwise please call us at 954-580-9551 to arrange shipment of your controller for install. Kit includes: 2. u.fl to rp-sma female pigtail cables 2 8dBi yagi antennas, tuned to […]
With a LHCP 4.25 turns helix 10dBi 5.8ghz and a LHCP 10 dBi half sphere helix 2.4 you Typhoon H will have all the range you need.
This is the new higher gain version of the popular FPVLR kit for 3DR Solo. Beamwidth is 60 degrees measured at -3dB… gain is a healthy and real 10.5dBi 4 miles+ distances are possible if using amplfiers, and 3 miles has been recorded in absolutely pefect conditions with no amps. […]
This kit is based on the P3 pro and Inspire 1 kit, it uses 1 LHCP + 1 RHCP 10.5dBi antennas. It can be used without amplifiers for double the stock distance and “penetration” ability. The amplified setup will triple stock distance potential and ability of the signal to penetrate through […]
*Revision April, 1st 2016*- shorter mount, much lighter and smaller amplifiers, proprietary mmcx to rp-sma cables with long connector, requires no drilling, no soldering, no trimming and can be used through stock antenna holes. The kit is able to hit 15,000 ft in the city with mild LOS occlusions […]
World record antennas on Phantom 3 Pro as seen in the images, 10.05 miles with plenty of signal left! *Revision April, 1st 2016*- shorter mount, much lighter and smaller amplifiers, proprietary mmcx to rp-sma cables with long connector, requires no drilling, no soldering, no trimming and can be used through […]
This is the new and improved kit for PH3 Standard. the 5.8ghz has been increased to 14.5dBi so it’s quite directional with 38 degrees beam width the 2 2.4ghz helix antennas for rc control are 10.5dBi and have a 55 degrees beam width It comes with 3 u.fl cables to […]
We are an authorized DJI and Yuneec repair center. We repair all major brands! Purchase as many hours of labor as you need. To get an accurate estimate please call us now at 954 580 9551. Please click here to learn more about Verydrone repair process.
This kit is designed for all Yuneec quadcopters using the ST-10 and ST-10+ controller for ranges of 4,000 ft unboosted and 8,000-12,000ft boosted (with 1 5.8ghz amplifier and 1 2.4ghz amplifier). Remember these antennas need to have the tips pointed at the quadcopter. What is included in this kit: 1 […]
This kit includes 1. redesigned antenna array with LHCP + RHCP helix 10.5dBi gain, 60 degrees beamwidth (measured at half power). It minimizes cross-talk when using high power rf amplifiers. 2. 3d printed plastic mount 3. 2 mmcx to rp-sma female pigtail cables to modify the radio control. You can […]