Spreading Wings S1000 + A2 + Zenmuse Z15-BMPCC

SKU: SW S1000 A2 A7
Warning: Drones purchased from unauthorized dealers on Amazon and eBay may not come with manufacturer warranties

All orders ship immediately from United States

$3,800.00







Reviews

Spreading Wings S1000+

 

  • Large Carrying Capacity, Strong and Stable
  • Highly Portable, with Foldable Arms
  • New Power Distribution System
  • Removable Upper Center Board
  • Sparkproof Plug
  • Professional Quality
  • Wide Range of Shooting Angles
  • Retractable Landing Gear
  • Compatible with Zenmuse Gimbals
  • Reduced Vibrations, Clearer Footage
  • Greater Power
  • Innovative Arm Design

 

A2

 

  • Advanced Stabilization Controller for Multi-Rotor Platforms (S900/S1000+)
  • A New Standard in Flight Control
  • Supports 9 Different Multi-Rotor Configurations and Features a Customized Motor Mixer
  • Precise GPS for Position and Altitude Stabilization
  • Intelligent Orientation Control (IOC) & Point of Interest (POI)
  • Banked Turn Mode & Cruise Control Feature
  • Intelligent Landing Gear Function
  • Enhanced Failsafe Features, Including Auto Return-to-Home
  • Single-Motor Failure Protection
  • Two-Tier Low Voltage Protection
  • Built-In Receiver and Support for S-BUS Receivers
  • Built-In Bluetooth Module and Support for Mobile Parameter Adjustments
  • Compatible with DJI Video Downlink, iOSD, Ground Station, Zenmuse Gimbals, and Future Products

 

Zenmuse Z15-BMPCC

  • Built for the BMPCC
  • HDMI-AV/HD module
  • 3-axis rotation control
  • Multiple control modes
  • A total solution
  • Gimbal servo drive module
  • Built in independent IMU module
Free Delivery · Free 30 Day Crash Warranty · Lifetime Tech Support · Factory-Authorized Dealer · 10 Day Return Policy · Financing Available
Description
Reviews

Spreading Wings S1000+

Features

 

  • LARGE CARRYING CAPACITY, STRONG AND STABLE
    Free yourself from weight limits and fly with heavy DSLR cameras such as the 5D Mark III with the advanced eight-rotor propulsion system of the S1000+. The S1000+’s arms and landing gear are made of sturdy carbon fiber, giving remarkable stability and strength. You’re flying in a variety of flight conditions with confidence, knowing your gear is safe.

 

  • HIGHLY PORTABLE, WITH FOLDABLE ARMS
    With arms that fold in to save space, the S1000+ is built to be taken wherever you need to go. Then when you want to fly, you are ready to start shooting in just a few minutes.

 

  • REMOVABLE UPPER CENTER BOARD
    The upper center board can be removed, giving you access to the IMU. Additionally, there are eight positions reserved for your extra equipment. So installation of your main controller, iOSD, Lightbridge, or any other accessories is faster and easier than ever before.
    This new center board structure is perfectly compatible with the DJI WKM and A2 flight controllers.

 

  • NEW POWER DISTRIBUTION SYSTEM
    A redesigned, rebuilt power distribution system improves safety and reliability. Gold-plated metal bearings with a unique screw design secure the power cords, ensuring cables will not come loose during flight and allowing easy setup.

 

  • SPARKPROOF PLUG
    Prevent short circuits and easily plug in your power supply with the AS150 sparkproof plug.

 

  • PROFESSIONAL QUALITY
    Weighing just 4.4kg, the S1000+ has a maximum takeoff weight of 11kg. This means you can easily carry most cameras and gimbals, including your 5D Mark III. Used with a 6S 15000mAh battery, it can fly for up to 15 minutes.

 

  • WIDE RANGE OF SHOOTING ANGLES
    Retractable landing gear and a low gimbal mounting bracket combine to enable a wide range of possible shooting angles and camera motions.

 

  • COMPATIBLE WITH ZENMUSE GIMBALS
    Full compatibility with DJI’s entire line of Zenmuse Z15 camera gimbals, including the new Z15-5D III (HD), provides unmatched stability in flight.

 

  • REDUCED VIBRATIONS, CLEARER FOOTAGE
    The S1000+’s gimbal bracket is separated from the main frame by specifically designed dampers. This significantly reduces high-frequency vibrations and makes your shots clearer and sharper.

 

  • GREATER POWER
    A 40A electronic speed controller (ESC), our fastest available, is built in to each arm. The 4114 pro motors, high performance 1552 folding propellers, and V-type mixer design combine to give each arm of the S1000+ a maximum thrust of 2.5Kg.
    Our latest motor adopts a single wire stator design, offering improved heat dissipation, better performance, and a tidier, more reliable system.

 

  • INNOVATIVE ARM DESIGN
    Each arm is designed with an 8° inversion and a 3° inclination, making the aircraft more stable when rolling and pitching, yet more flexible when rotating.

 

A2

 

Advanced Stabilization Controller
The extraordinary precision of the A2 sets a new standard in flight control by providing a complete, stable flight system for a wide variety of multi-rotor platforms.

“9 Multi-Rotor Configurations & Customized Motor Mixer”
“The A2 was designed for commercial and industrial multi-rotor platforms. Simple configuration, easy installation, and stable performance make it perfect for almost any application. The A2 also supports customized motor mixing, which allows it to meet the specific demands of individual users.
The A2 supports nine different motor configurations: Quad I / Quad X / Hex I / Hex V / Hex IY / Oct X / Oct I / Oct V”

Intelligent Orientation Control (IOC)
“Usually, the forward flight direction corresponds with the aircraft’s nose direction. Intelligent Orientation Control (IOC) allows the forward direction to be set to any specified direction, regardless of how the nose orientation changes during flight.
In Course Lock flying, the forward flight direction is set to correspond with nose direction of the aircraft at the time that Course Lock mode is activated. In Home Lock flying, the forward flight direction is the same as the direction from Home Point to the aircraft.”

Point of Interest (POI)
Users can record the position of the aircraft as a Point of Interest, at any time, using a switch on the remote controller. Then, when the left control stick is pushed either left or right, the aircraft can perform a circular flight around the Point of Interest, with its nose pointing toward the POI. This distance from the aircraft to the POI can be set between 16 feet (5 meters) and 1,640 feet (500 meters). This function is easy to set up and simple to operate, making it the ideal solution for when you want to fly 360 degrees around a specific point at a fixed distance.

Intelligent Landing Gear
Once the Intelligent Landing Gear function has been enabled in the Assistant software, the landing gear will be lowered whenever the aircraft is close to the ground. The system will automatically lower the landing gear in the case of an emergency, motor failure, or auto landing event. This serves to protect the aircraft and the gimbal. You can use the switch to manually change the position of the landing gear when the aircraft reaches an altitude of 16 feet (5 meters) or greater.

Auto Return-to-Home
“If the connection between the aircraft and the controller is broken during flight, and the aircraft’s GPS signal is strong enough, the aircraft will return to the Home Point and land automatically.
You can also press the Return-to-Home button to manually activate this feature at any time.”

“Banked Turn” Mode
In this mode, the roll and yaw control sticks are combined in order to help you perform banked turns using one hand. The aircraft can be maneuvered like a fixed-wing aircraft, thereby providing a new flight experience. Normal and FPV aerial photography are stable and smooth, giving your work a whole new visual effect.

Cruise Control
Activate Cruise Control to lock your aircraft into its current horizontal speed. While cruise control is active, the speed can be adjusted at any time using the remote controller. By maintaining a steady flight speed, you can dedicate more attention to controlling the camera and capture the perfect shot every time. This function also increases the total flight time by eliminating unnecessary speed changes that increase power consumption.

 

Zenmuse Z15-BMPCC

 

AN EXTRAORDINARILY SMOOTH PROFESSIONAL 3-AXIS GIMBAL
The DJI Zenmuse Z15-BMPCC gimbal represents a breakthrough in Zenmuse precision, offering a control range of just ±0.01°. Used with a DJI A2 professional flight controller and a professional DJI aerial system, it will keep the BMPCC stable and controllable even in strong winds or intense maneuvers.

Built for the BMPCC
Each Zenmuse is guaranteed to deliver nothing short of the best in camera control and stabilization. The Zenmuse Z15-BMPCC is built only for the Black Magic Pocket Cinema Camera, known for true digital film quality images through a feature film style 13 stops of dynamic range, Super 16 sensor size, high quality lossless CinemaDNG RAW and Apple ProRes™ recording. All of this is packed into a small body, making the Black Magic Pocket Cinema Camera ideal for aerial cinematography and photography.

HDMI-AV/HD MODULE
Weight is minimized using a video output module offering camera shutter and other features while transforming the camera’s HDMI signal into an AV signal first person view. Wiring has been kept to a minimum to further reduce weight.

3-AXIS ROTATION CONTROL
The 3-axis Zenmuse Gimbal system’s creative mechanical design makes control through the transmitter stick both intuitive and easy. Its internal slip rings avoid complicated wiring. Both power and signal lines have been integrated into gimbal’s tubes, resulting in a completely unhindered control axis that offers a maximum yaw of ±360°, pitch of +50°/-140° and a roll of ±40°.

MULTIPLE CONTROL MODES
Three camera control modes are offered to maximize creativity and ease of flight. Orientation-locked, Non Orientation-locked and Back to Mid-point (Horizontal). All three modes can be switched between, quickly and easily in line with the needs of each shoot.

A TOTAL SOLUTION
The Zenmuse Z15-BMPCC is ideal for the S800 EVO, S900 and S1000 flight platform and works with other DJI products including the A2 and WooKong-M multirotor flight controllers. Used with the DJI Lightbridge HD digital video downlink or an iOSD Mark II and a 5.8G video link, it is a Total Solution for aerial photography and cinematography.

GIMBAL SERVO DRIVE MODULE
What gives every Zenmuse its precision is our specially designed Gimbal Servo Drive Module. Each of these is tailored to the weight and balance of the camera it has been designed to move. This significantly improves control and stability, maximizes torque, while minimizing vibration.

BUILT IN INDEPENDENT IMU MODULE
A new stabilizing algorithm providing more stability than ever before and extremely precise induction devices combine to create effortless attitude control. With these in place, the S1000 needs no extra equipment installation or wiring, making it easier to get shooting faster.